TECHNICAL RESOURCES
PCE believes that information received for engine installation, break-in, and aftercare following an overhaul or repair is as important as the engine work performed. Frequent flight, proper operation, and routine maintenance are all key components of engine longevity. This page is dedicated to supplying you with the most up to date information available for the care and feeding of your engine.
Click on a link below to view the related document. If you don’t see the information you need, just email or call us.
QUICK LINKS
CONTINENTAL
- M89-9 Breather Pressures
- MSB 18-08C Cross Flow Cylinder Inspection
- SB 03-3 Cylinder Compression & Borescope
- ECI Engine Overhaul or Cylinder Replacement
- MSB 89-18 EGT Recommendations
- SIL 98-6B Fuel Injection System Application Guide
- SID 97-3G Fuel System Adjustment
- MSB 94-8D Magneto Timing
- M-0 Standard Practice & Maintenance Manual
- SIL 00-7C Oil Gauge Rod Application
- SIL 99-1 Preservation
- M76-4 Propeller Seal Replacement
- SB 96-11B Propeller Strike Inspection
- SIL 99-2C Recommended Sealants
- SI 05-9 TCM Connecting Rods
- CSB 08-3C Throttle Mixture Arms
- SB 96-7D Torque Limits
LYCOMING
- SI 1037Y Approved Cylinders & Related Parts
- SI 1324D Crankshaft Seal Replacement
- SI 1508C Dual Magneto Capacitor
- SB 342G Fuel Injection Line Inspection
- Key Reprints Flyer
- SI 1094D Leaning
- SI 1014N Lubricant Recommendations
- SFN-880-4 Cylinder Application List
- SI 1437 Magneto Timing
- SB 140W Mandatory Parts Replacement
- SSP-499C Numerical Parts History
- SI 1241C Pre-Oil
- SIL 99-1 Preservation
- SB 533C Propeller Strike Inspection
- SIL RS-67 RSA Idle Speed & Mixture Adjustment
- SSP-109 Service Literature Index
- SSP-1776-5 Table Limits & Torque Value